IMPORTANT
A family of 2 adults and 2 children stand next to a PanelBoost panel

PanelBoost

Add a heat pump or other electrical appliance to your home without the costly electrical panel upgrade

PanelBoost is coming in early 2027. Apply now to see if your home qualifies.

What PanelBoost can do for you

PanelBoost helps you add appliances like heat pumps and EV chargers without needing a costly electrical panel upgrade.

Save money

Save $3,000–$20,000 on panel and service upgrade costs.

Save time

Faster installation with less disruption compared to a traditional upgrade.

Future-proof your home

With PanelBoost, your home and local grid will be ready to support the large electric appliances you may want to install in the future.

What is PanelBoost?

PanelBoost is an easy-to-install smart panel that connects to your utility meter on your home and allows you to install large electric appliances without overloading your existing electrical panel.

 

PanelBoost is a PG&E program that helps you add large electric appliances, like a heat pump or EV charger, without overloading or replacing your existing electrical panel. SPAN Edge installs at your home's electric meter and intelligently manages how your appliances draw power.

A smart panel is connected to a SmartMeter™

It helps unlock more flexibility from your home's existing electrical service. It can support devices like:

  • Heat pumps
  • EV chargers
  • Large electrical appliances 

PanelBoost reduces the cost and complexity of electrification. By intelligently balancing energy use in the home, PanelBoost may help you avoid a traditional panel upgrade.

 

 Note: Installation requirements and costs may vary by home.

How PanelBoost works

Your electrical service is sized for how much power everything in your home could use at the same time. Adding large appliances can push past that limit, which is why homes often need an expensive upgrade.

 

PanelBoost takes a smarter approach. Using SPAN PowerUp technology, it monitors your home's energy use, and in the rare moments when demand nears your limit, it briefly pauses or slows a lower-priority appliance to keep your system within a safe range. The result is that your existing service can support much more than it could on its own.

 

You stay in control. You choose which appliances get priority, you use power just as you do today, and if PanelBoost ever makes an adjustment, you'll get a notification. You can change your priorities anytime in the SPAN Home App.

You may be a good candidate for PanelBoost

You own a single-family home

Your home has a 150 amp or smaller electrical panel

You want to install an EV charger

You are planning a heat pump upgrade or addition of other electric appliances

You are an active residential PG&E electric service customer

You were told you may need a panel or service upgrade by an electrician

What's included

Free PanelBoost hardware

  • Qualified participants receive PanelBoost hardware at no cost through the program.
  • PanelBoost panel extension including 8 breaker spaces.

 

Professional installation support

  • The program coordinates licensed electricians, utility meter upgrades and installation support throughout the process.
  • Skip the weeks or months a traditional panel or service upgrade can take. PanelBoost is designed to install quickly, the meter swap is typically done in under an hour, and there's no need to rewire your existing panel.

 

Insights and control through a customer app

  • See real-time energy use for each appliance connected to SPAN Edge, and track patterns and costs over time with energy insights. Choose which appliances take priority, for example keeping your heat pump running while your EV charges a little later during a hot evening. Turn your connected appliances on or off from the SPAN Home App, and get a notification whenever PanelBoost makes an adjustment.

 

 Note: You are responsible for the cost of your new appliances and their installation by your electrician.

Frequently asked questions

If you're planning to install a new appliance in your home, your existing electrical panel may not have enough capacity to support everything all at once. High-demand appliances such as heat pumps, electric stoves, EV chargers and other electric upgrades often require a costly panel replacement. PanelBoost helps you make better use of your existing electrical service, allowing you to add more without replacing your panel. The result is lower cost and less disruption to your home. 

You may be eligible if you:

  • Are an active PG&E residential electric customer.
  • Own a single-family home or detached residence and pay the electric bill.
  • Have a 150-amp service or smaller, or need a panel upgrade to add a heat pump, heat pump water heater, induction stove, EV charger or other high-demand appliance.

Apartments, condominiums and homes where the landlord pays the electric bill are not currently eligible. The need for a panel upgrade must be verified by a licensed electrician.

A full panel upgrade typically costs $3,000 to $8,000 for homes with overhead service. The cost can be $20,000 or more if your service is underground since trenching is often required. PanelBoost avoids all of that by optimizing your existing setup. PG&E covers the cost of the PanelBoost equipment. You pay only the electrician's standard fees for installation, permits and appliance connections. In many cases, the total cost is much lower than replacing your electrical panel.

PanelBoost is designed to make better use of your existing electrical service. During rare periods of high demand, PanelBoost may briefly pause a connected appliance to keep your home's electrical system within its limits. You choose which appliances have priority, and you'll receive an alert if an adjustment occurs.

 

PG&E offers PanelBoost because it helps customers electrify their homes without costly panel upgrades while support a more reliable grid as more homes switch to electric appliances. It's a solution that benefits both homeowners and the broader energy system.

PanelBoost does not limit your day-to-day electricity use. You can run your appliances as you normally would.

 

During rare periods when your home's demand approaches its limits, PanelBoost may briefly delay a lower-priority appliance to help keep your electrical system operating safely. You decide which appliances have priority and can change those priorities at any time through a customer app, and will be notified whenever an adjustment is made.

PanelBoost is a great fit for many homes, but some projects still require a traditional panel upgrade. This may be the case if you're building an ADU, adding more electrical loads than PanelBoost can support, or if your existing panel is outdated or unsafe.

 

If you're not sure which option is right for your home, a licensed electrician can help you decide.

The panel itself uses virtually no power. Your bill only rises if you add appliances that consume more electricity. The customer app helps you track usage and spot savings opportunities.

Step 1. Electrician installs PanelBoost. A licensed electrician installs the PanelBoost system and prepares your home for setup.

Step 2. PG&E installs new SmartMeter™. PG&E upgrades your meter to support intelligent energy coordination between your home and the grid.

Step 3. Electrician connects appliances and completes setup. Your electrician connects eligible appliances and finalizes the system configuration.

Your appliances respond automatically. PanelBoost coordinates connected appliances in the background so you can add more electric devices with less hassle.

This depends on your local building codes. Your electrician may need to pull permits for any new appliances they connect. Most electricians will manage that paperwork for you.

Yes, but only briefly as your new meter is installed. The meter swap is typically completed in under 30 min and your power will be off for 5–10 min.

Absolutely. PanelBoost has space for up to 8 appliance connections. Your electrician can return whenever you're ready to electrify something new. You can upgrade your home as your needs grow.

  • Heat pump
  • Induction range
  • Hot tub / Sauna
  • Water heater
  • Dryer
  • EV charger
  • Virtually any electric appliance

Yes. If you already have solar, PanelBoost works alongside it with no changes needed. If you have battery backup, PanelBoost is installed separately from your backup system and does not connect to it. Your backup system stays on your main panel and continues to work as it does today.

Qualified participants receive the PanelBoost hardware, which remains with the service address as part of the utility's grid-edge infrastructure when the participant sells or moves. Transfer of account access will be handled through PG&E.

Have additional questions or need support?

Contact us at PanelBoost@pge.com.

More resources

ChargeBoost

Are you only looking to install a Level 2 EV charger at home? ChargeBoost offers a way to enable fast Level 2 charging at home while avoiding a main panel upgrade. A great solution if you're only planning to add an EV charger right now.

Home electrification

Move toward an all-electric home quickly and efficiently with the electrification guide.

Clean energy living at Powerhouse San Jose

Experience clean energy solutions for your home.