November 2013 Bill Inserts

Each month, PG&E offers important information on rebates, saving energy and safety in printed inserts that accompany your bill. Now, access this information online whenever you wish.

At home, or on the job. Be safe. Dig safe.

Natural gas safety
Natural gas safety: Call 811 before you dig
Always call 811 at least two working days before starting any project that involves digging to have underground utility lines located and marked for free.

Gas pipeline locations
PG&E operates natural gas distribution and transmission pipelines across California. Our distribution pipelines are located throughout neighborhoods and connect to homes and businesses.

Our transmission pipelines carry gas from one part of the state to another and connect to our distribution system. We offer a comprehensive online map showing our transmission pipelines at You can view any location in our service area—your home, place of work or any other areas of interest—to see if transmission pipelines run nearby.

Also, the National Pipeline Mapping System,, shows the location of all transmission pipelines in the United States, viewable by county, zip code or street address.

Spot the signs of trouble
PG&E regularly inspects all of our pipelines to check for possible leaks or other signs of damage. As an additional safety precaution, we also add a sulfur-like odor to natural gas. If you smell this distinctive 'rotten egg' odor, move to a safe location and immediately call 911 and PG&E at 1-800-743-5000.

But don’t rely on your nose alone. Other signs of a possible gas leak can include:

  • Dirt spraying into the air
  • Continual bubbling in a pond or creek
  • Dead or dying vegetation in an otherwise moist area
  • Hissing, whistling or roaring sounds coming from underground or from a gas appliance

In case of emergency
You can help prevent a natural gas pipeline fire. If you suspect a gas leak, leave the area immediately and move upwind, to a safe place. Then call 911 to notify local police and fire and contact PG&E
at 1-800-743-5000.

Warn others nearby to stay away from the area. Until you are a safe distance away, do not light a match or operate any device that might create a spark, including electric switches, doorbells, radios, televisions, cell phones and garage door openers.

Before you dig, know what’s below
Damage from excavation is a common cause of pipeline accidents. Even if you are planting a new bush or digging a fence post in your own yard, you must always call 811 Underground Service Alert (USA) at least two working days before you dig. USA is a free service that will notify underground utility operators in the area of your planned work. PG&E will then locate and mark our underground gas and electric facilities.

Always be aware of pipeline markers. Markers include an emergency number and indicate the need for extra care around a high-volume transmission line. These markers specify the approximate location, but not all pipelines follow a straight path between markers. If you or your contractor accidently digs into a gas pipeline, do not attempt to stop the flowing gas or extinguish any fire.

Leave the area immediately and move to a safe location. Then call 911 to notify local police and fire and contact PG&E at 1-800-743-5000.

Safety is PG&E’s highest responsibility
We monitor our gas pipeline operations 24 hours a day, 7 days a week, and we conduct regular inspections and surveys on pipelines.

Find out more about our comprehensive safety and monitoring program visit

To watch a video with tips for how to safely dig near underground pipelines visit Call Before You Dig

For more information about gas pipeline safety, contact us at the numbers below:

For assistance in English please call 1-888-743-7431

Para ayuda en español, por favor llame al




Kung kailangang makipag-usap sa nakakasalita ng Tagalog, tumawag

sa 1-888-641-5019


Before. During. After. Be prepared for earthquakes.

Get safety tips

Save time. Reduce waste. Help the environment.

It’s easy! Learn how to enroll in paperless statements today

PG&E’s 2012 power mix

PG&E delivers some of the nation’s cleanest electric power. More than half of the electricity we provide to our customers comes from sources that are renewable and/or emit no greenhouse gases. In fact, PG&E’s electricity creates only one-third as many greenhouse gas emissions per kilowatt-hour compared to the industry average.

The 2012 Power Mix of PG&E incuding all PG&E-owned generation plus PG&E's power purchases

We are aggressively adding more renewable energy to our power mix under California’s renewable portfolio standard and are well on our way toward 33 percent renewables by the end of 2020. We are investing in a range of clean energy resources such as solar, wind, geothermal, biomass and small hydro, and are also investing in state-of-the-art, cleaner sources of fossil fuel-based power to meet demand.

Power content label

Actual 2012 electric resources for Pacific Gas and Electric Company (PG&E), as reported to the California Energy Commission.

ENERGY RESOURCESPG&E 2012 POWER MIX (Actual)2012 CA POWER MIX** (For Comparison)

Eligible Renewable:

  • Biomass and waste
  • Geothermal
  • Small hydroelectric
  • Solar
  • Wind


  • 4%
  • 5%
  • 2%
  • 2%
  • 6%


  • 2%
  • 4%
  • 2%
  • 1%
  • 6%




Large Hydrolelectric1



Natural Gas















* Beginning in 2010, transactions not specifically traceable to specific generation sources are designated as "unspecified" in accordance with AB 162's revisions to Public Utilities Code section 398.2.
**Percentages are estimated annualy by the California Energy Commission based on electricity sold to California consumers during the previous year.

For information about PG&E's power content, contact PG&E at 1-800-743-5000 For information about California's power mix or for general information about the Power Content Label, contact the California Energy Commission at 1-800-555-7794 or


* Due to rounding conventions, the numbers above may not add up to 100%.
* A significant amount of the energy generated by PG&E comes from clean, large hydroelectric power stations, which under California law, do not qualify as an eligible renewable resource.

Natural gas customers: important gas safety information regarding customer-owned piping

PG&E’s natural gas distribution lines connect pipelines in the street to the gas meter. Customer-buried piping (or customer-owned pipelines) are any above ground or buried pipelines from the customer’s property to the gas meter. These include pipelines leading into a building or house, to any gas-fired equipment/appliance, or from the house to a swimming pool heater, spa or other building (please see below).

Customer-buried piping connecting different buildings

Customers* are responsible for the maintenance of customer-owned pipelines on their property from the meter to their house or business. Typically, PG&E does not own, maintain or inspect the customer-owned pipelines or gas lines beyond the meter. We have included some safety information for you below.

Safety Maintenance and Inspections
Maintenance is important to prevent pipeline corrosion and leakage. You should periodically inspect your customer-owned gas lines for leaks and, if lines are metallic, for corrosion. A licensed plumber or qualified contractor can help you locate, inspect and repair buried pipelines on your property. Pipelines should be immediately repaired if corrosion or another unsafe condition is discovered.

Prevent Damage with Safe Digging Practices
Pipeline accidents and damage occur most often from digging. Always call Underground Service Alert by dialing 811 at least two working days before you dig—even in your own yard.

Underground Service Alert is a free service in which local utility companies mark the approximate locations of their underground lines so you can dig safely. As a precaution, you should use a hand tool when digging near underground utilities.

Digging can still damage customer-owned pipelines since they are not located by calling 811. A plumber or licensed contractor can help you locate customer-owned pipelines. Be sure to maintain records of their location for future work. You can learn more about gas pipeline safety by visiting

If you have questions, call our Gas Safety Help Line at 1-888-743-7431.
Learn more about natural gas pipeline safety.


*“Customer” refers to the owner of the gas piping system served by PG&E. This may be either the property owner or another party who owns the gas piping.

PG&E’s notice of accessing, collecting, storing, using, and disclosing energy usage information

Your privacy is a top priority for PG&E. For more information about how we protect the privacy of your account information, view our privacy policy at

You may also request a copy of our privacy policy by calling
1-800-743-5000, or by writing us at:

PG&E Residential and Business Customer Service
Correspondence Management Center
PO Box 997310
Sacramento, CA 95899-7310